With auto detailing schools that offer top-notch training programs, it’s now easier to install coatings. It saves you tons of money. You can also use that knowledge to open a car shop providing those services. You can save on future coating costs by installing the coatings. But what if you need to correct a mistake during the installation process? Or what if you have cars that require new coatings? You’ll need to remove the existing layer first. Here are top tips that can help you through the process, so you can get the job done without scratches and swirls, allowing you to get outstanding results.
Let’s Start with Your Reasons
Even the best coating products on the market will wear thin over time. That will happen to your coating eventually. Once you start seeing the signs, you’ll need to look for coating options. Before you install a new layer, you must remove the existing coating. That’s where ceramic coating classes come in. They teach you how to apply and remove the coating with ease. That way, you won’t have to worry about making a few mistakes that could damage your car’s coating or chassis. Knowing how to remove the coating will also save you a lot of time and effort.
Why Remove the Coating?
Are you wondering why you should bother removing the coating in the first place? If you find the process of removing the old coating tedious, you may think about skipping this step. But that’s a mistake. You need to remove the old coating to give the new layer more car space to adhere to. If you only install the new coating over the old layer, once the old layer peels off or worsens, there goes your new coating. If you don’t want all your effort to go to waste, prep your car properly. For stubborn or thicker coatings, mechanical removal methods may be required. This can include sanding, scraping, or using abrasive tools. Exercise caution to avoid damaging the underlying substrate.
Ask for the Manufacturer’s Advice
Before you get started, ask the manufacturer for advice on removing the coating from the car without compromising your ride’s paint job. That can prevent mishaps with the coating removal. Most car manufacturers can provide this information, so you won’t go in blind when you try to remove the coating. Once the coating is effectively stripped away, thoroughly clean the surface to remove any residual stripping agents or debris. This step is crucial to ensure proper adhesion of the new coating. Apply the selected stripping agent following the manufacturer’s instructions. This may involve brushing, spraying, or rolling on the product, depending on the formulation. Allow the stripping agent sufficient time to penetrate and break down the existing coating.
How Do You Remove the Coating
You can do this in three ways: by using a clay bar, by polishing off the old coating, or by using a chemical removal. All these options can work well for you, so you’ll want to give them a try. Polishing experts, though, choose polishing as the best method out of the three. If you don’t want to waste time going through all those methods to determine the best one, consider that advice. Start by polishing the coating off. Inspect the substrate for any damages or imperfections that may have been revealed during the stripping process. Make necessary repairs before proceeding to the application of the new ceramic coating.
Look for the Safest Option
Polishing the coating may be the best, but it also requires a lot of experience. If you’re not confident about the level of your skills yet, consider using a clay bar. That is the safest approach out of all the three options. Follow these steps to get the best results:
- Wash the car first. You need to remove all the dust, grime, and dirt. Use a wax stripping shampoo. That helps loosen up the dirt and gives your car a shine.
- Once you have removed the dirt and grime, use the clay bar on the car’s surface. You can also use the clay bar with a mitt to improve your grip.
- Be thorough. Make sure you cover every inch of your car before you put down that clay bar.
- Rinse the vehicle. Again, be thorough so every inch has been rinsed.
- Dry it well. Don’t drive it anywhere until the coating dries.
Conclusion
By following this step-by-step guide, you can strip ceramic coatings effectively, preparing the substrate for the application of a fresh coating that will provide enhanced protection and aesthetic appeal. Always adhere to safety guidelines and consult with coating manufacturers for specific product recommendations and procedures. With auto detailing schools that offer top-notch training programs, it’s now easier to install coatings. It saves you tons of money. You can also use that knowledge to open a car shop providing those services. You can save on future coating costs by installing the coatings.
